- New Inventory
- Used Inventory
- Promotions
- Finance
- Product Info
- Parts
- Service
- Why Us?
- Employment
SASB Sweep Action Solid Bottom Grapple
SASB-72
Overview:
These scrap buckets in addition to their sweep action clamps feature buckets with the cutting edges drilled to accept a bolt-on beveled (reversible) cutting edge increasing the durability and life of the bucket edge. Sweep action clamps are raised, lowered and closed by 2” x 8” 3,000 psi cylinders. Cylindrical compression spring of round wire holds the front sweep clamp in its open position to allow gathering of debris. This versatility allows the operator to own one tool to handle all types of materials.
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Loan Calculator
Use the Loan Calculator to help you determine the financing and payment options that are best for you.
**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. This information is provided for illustrative purposes only and does not constitute an application.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Features
One Tool: many applications, best describes the Sweep Action Tine and Solid bottom construction grapples. The patent pending design keeps the front rake of the sweep clamp open during use until the rear section of the clamp is either closed or contacts the material being handled. The cylinder then overcomes the spring pressure causing the front rake to rotate towards they bucket in a sweeping motion moving material in and retaining it in the bucket.
The upper sweep-in clamps are 21 inches in width with solid steel front for added strength, as well as material control. They are raised, lowered, and closed by 2" x 8" 3,000 psi cylinders.
SASB-series features our scrap yard tested solid bottom low-profile bucket. The bucket bottom is made from abrasion resistant steel with three 1/2" x 4" reinforcing wear strips for longer bucket life. The bucket cutting edge is pre-drilled to accept the optional bolt-on beveled (reversible) cutting edge, increasing the durability of the bucket edge.
Specifications
| Model | SASB-72 |
| Overall Width (in/mm) | 72 / 1829 |
| Bucket Depth (in/mm) | 30 / 762 |
| Upper Grapple Width (in/mm) | 21 / 533 |
| Length of Front Sweep Clamp (in/mm) | 21.5 / 546 |
| Degrees of Sweep | 44 |
| Grapple Opening (in/mm) | 37.13 / 943 |
| Bucket Material | AR |
| Bottom Wear Strips | Yes (3) |
| Optional Bolt-on Cutting Edge (3/4" x 8") | 811790 |
| Hose Routing | Inside the Frame |
| Cylinder Pressure Rating (psi/bar) | 3000 / 207 |
| Flat-face Couplers Standard | 1/2 / 13 Body |
| Mount Type | "Universal Skid Steer" |
| Weights (lbs/kg) | 815/370 |
| Product No. | 812530 |