Land Pride RCM4620

Double tap to zoom

RC4620 Rotary Cutter

RCM4620

Overview:

Land Pride's RC4620 (RCM4620) 20' Rotary Cutter complements our broad line of folding cutters. This cutter is also available in a single wing, 14-foot and 1000 RPM models, is designed for use in contract- and municipal mowing applications. Right of ways, roadsides, pastures, open areas, and row crop fields are all candidates for this heavy-duty cutter.

Get a Quote

Send to a Friend

Payment Calculator

Get A Quote

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Loan Calculator

Use the Loan Calculator to help you determine the financing and payment options that are best for you.

**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. This information is provided for illustrative purposes only and does not constitute an application.

Send To A Friend

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

Share This Product:

Features
Specifications

Features

Features	Benefits
Surpassed rugged industry standards	All Land Pride Rotary Cutters have been designed and tested and meet rigorous voluntary testing procedures according to ISO 4254-13.
Factory assembled	Saves customer set-up time and money. Adjustments should always be made by dealer.
250 HP divider gearbox 210 HP center & wing gearboxes	Rugged heavy-built gearboxes capable of handling heavy-cutting applications.
Gearbox seal protection	Gearbox bottom seal protection for longer bearing life.
2 3/8" Output gearbox shaft	Large output shaft handles shock loads better.
Input driveline: Cat. 6 CV or Cat. 5 Conventional	Holds up to shock loads and harsh mowing conditions.
Easy greasable drivelines	Drivelines have access holes for greasing the U-joints and to grease the inner profiles.
4 Plate slip-clutch	Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline when impacts are encountered.
High blade tip speed	Allows clean cutting of material & even distribution. See Specifications for actual FPM.
6" Blade overlap	Eliminates skipping during turns.
Good cutting capacity	Can cut brushy areas with saplings up to 3".
13" Deck height	Handles heavy cutting, which reduces balling-up of cut material under the deck.
Diamond shaped blade holder	Heavy diamond shaped blade holder for protecting the gearbox seal and gearbox output shaft. Can hold up to tough conditions.
Optional dishpan	Dishpan provides extra protection against stumps and other protrusions. Excluding the dishpan eliminates grass/dirt buildup which can cause vibration.
Spindle Nut Protected	Spindle nut and threads extending beyond the nut are guarded to protect against damage from hitting solid objects.
Shredder Blade Kit (Optional)	Ideal for cutting residue into smaller pieces. Replaces standard blade bar/dish configuration.
10 gauge smooth deck top	Reduces accumulation of debris and is easier and faster to clean.
1/4" side skirt	Reduces debris piercing possibilities.
Self-leveling hitch	Reduces drawbar wear by keeping hitch level while going through ditches.
Hinged wing sections	Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
1" Solid hinge rods	Larger diameter hinge gives greater strength to cutter and hinge area.
Wing transport locks	Holds transport wings in the folded-up position in case of hydraulic pressure loss.
Enclosed front to rear dual leveling rods	Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.
5-Bolt hubs	5-Bolt hubs makes the wheel assembly more durable and longer lasting.
Drain holes in wheel rims	Allows water to drain from wheels mounted on folded-up wings. Helps prevent paint deterioration and rusting to the wheel rims.
Spring-cushioned center axle	Protects unit from bumps and ground shock, cushions loads on drawbar.
Replaceable wheel spindles	Wheel spindles can be replaced when damaged without replacing the entire axle. mply remove one bolt to replace damaged spindle.
Rephasing lift cylinders	Allows cutter to be leveled using hydraulic cylinders versus mechanical turnbuckles.
7/8" Leveling rods	Large diameter leveling rods provide superior supporting strength over rough terrain.
LP Performance Hitch option	Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar.
Bar-tite hitch option	Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
Roadway light kit option	Allows operator to transport on public roads safer when headlights are turned on and/or when flasher lights are turned on.
Wheel options	Laminated tires: Eliminates flats. Air-filled tires: Give better cushion while transporting. Foam-filled tires: Give better cushion while transporting & can’t go flat.
Deck rings (optional)	Keeps blades from damaging the deck.

Specifications

Specifications & Capacities	RCM4620
Tractor horsepower	70 hp (52.2 kw) to 250 hp (186.4 kw)
Gearbox Horsepower	250 hp (186.4 kw) Splitter 210 hp (156.6 kw) Center & Wing
Gearbox Oil Capacity	6.2 Pints (2.93 L): Divider Gearbox 4.7 Pints (4.7 L): Center deck, LH deck & RH deck spindle gearboxes
Gearbox Lubrication	Gear Lube 80-90W EP
Cutting Capacity	3" (7.6 cm)
Weights Total Machine Tongue Weight	6,540 lb (2966.5 kg) Front & rear single chain guards, 6 - AC/FF tires, CV Driveline, standard clevis, & diamond blade bar with dishpan. 2,160 lb (979.8 kg)
Blade Tip Speed RC4620 RCM4620	Up to 17,000 fpm (86.4 mps) Up to 18,000 fpm (91.4 mps)
Hitch Types	Self-Leveling Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Pintle Hitch, or Ball Hitch
Hitch Jack	Standard 7,000 lbs (3175.1 kg)
Signal lights 7 Pin connector	LED SAE J560 pin configuration
Cutting Width Overall Width Minimum Transport Width	20' - 0" (6.1 m) 21' - 0 1/2" (6.41 9' - 11" (3.02m) With cutting height at 2" (5.1 cm)
Overall Length	17' - 8 1/2" (5.4 m) With cutting height at 2" (5.1 cm)
Deck Height	13" (33 cm)
Cutting Height*	2" (5.1 cm) to 12" (30.5 cm)
Lift Hydraulics Center Deck Right Wing Left Wing	3 1/4" x 8" Rephasing hydraulic cylinder with hoses, fittings & stroke control spacers. 3" x 8" Rephasing hydraulic cylinder with hoses & fittings. 2 3/4" x 8" Rephasing hydraulic cylinder with hoses & fittings.
Wing Folding Hydraulics	Two 3" x 12" single-acting hydraulic cylinders complete with hoses & fittings.
Wing Flex	45o up, 20o down while cutting.
Deck Material	1 - Piece, 10 gauge (3.4 mm)
Side Skirt Material	1/4" (6 mm) plate.
Skid Shoes Wing Deck Center Deck	Reversible & Replaceable: 2 straight skid shoes and 2 AR400 leading skid shoes. Replaceable: 2 skid shoes
Six Blades (2 per Carrier)	1/2" (13 mm) x 4" ( 10.2 cm) Heat treated free swinging alloy steel with up lift.
Blade Overlap	6" (15.2 cm)
Blade Bolt	Keyed with hardened flat washer & locknut.
Stump Jumper / Blade Holder	Standard: 1" (2.5 cm) Thick diamond blade bar Optional: 1" (2.5 cm) Thick diamond blade bar with round dishpan Optional: Shredder kit
Shredder Blade Kit (Optional)	Double stacked 1/2" (30.5 cm) x 4" (10.23 cm) heat treated free swinging alloy steel blades with up lift on the bottom and 1/2" (30.5 cm) x 4" (10.23 cm) heat treated free swinging flat alloy steel blades on top.
Deck Ring (Optional)	3/8" (10 mm) formed and welded.
Front & Rear Guards	Single chain or double chain.
Input Driveline	ASAE Cat. 6 with constant velocity u-joint
Intermediate & Wing Drivelines	Cat. 5 with slip-clutch
Tire Options	6" x 9 x 21" Laminated tires 29" x 9" Used aircraft tires without foam filling 27" x 7.75" Used aircraft tires with foam filling
Number of Wheels	6 - Wheel option: 4 on transport axle and one on each wing axle. 8 - Wheel option: 4 on transport axle and two on each wing axle.
Standard Transport Axle	Spring-cushioned on center transport axle.
Axle Fasteners	1 1/4" (3.2 cm) Greasable pins
Hubs	Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" (4.4 cm) shafts.

Amount Financed ($)
Interest Rate (%)
Loan Term in Months
Monthly Payment	Calculated
Yearly Payment	Calculated

Submit your question below