Land Pride RC2512

Double tap to zoom

RC2512 Rotary Cutters

RC2512

Overview:

Land Pride's RC2512 Rotary Cutter is designed for smaller tractors while retaining the features and benefits of larger folding cutters. The 12' width, sharp turning radius, and low tongue weight makes this an ideal Rotary Cutter for compact tractor owners that need a large rotary cutter for farm grass maintenance. The RC2512 offers a pull-type, self-leveling tongue with a clevis hitch for attachment to 40-100 HP tractors. It features a constant velocity Cat. 4 main driveline and Cat. 3 connecting drivelines with slip-clutch protection. The standard stump jumper under each blade spindle slides over stumps, rocks and debris. Front and rear single chain safety guards provide protection against thrown objects.

Get a Quote

Send to a Friend

Payment Calculator

Get A Quote

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Loan Calculator

Use the Loan Calculator to help you determine the financing and payment options that are best for you.

**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. This information is provided for illustrative purposes only and does not constitute an application.

Send To A Friend

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

Share This Product:

Features
Specifications

Features

FEATURES	BENEFITS
Surpassed rugged industry Standards	All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures according to ISO 4254-13.
Factory assembled	Saves customer set-up time and money.
160 HP Divider gearbox and 100 HP wing gearboxes	A rugged heavy built gearboxes capable of handling heavy cutting applications.
Gearbox Seal Protection	Gearbox bottom seal protection for longer bearing life.
Input driveline: Cat. 4 CV	Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
Easy greasable drivelines	Drivelines have access holes for greasing inner profiles and CV yokes. Main CV driveline has removable shields to make accessing CV zerks easier. Intermediate and wing drivelines have zerks on end of yoke crosses for easy access.
2 Plate slip-clutch	Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline when impacts are encountered.
High blade tip speed	Allows clean cutting of material and even distribution.
6" Blade overlap	Eliminates skipping during turns.
Left wing rotates counterclockwise	Better discharge of material. Picks up tractor tracks.
11" Deck height	Handles heavy cutting, which reduces balling-up of cut material under the deck.
10 Gauge Stump jumper backed with a 1" thick mounting bar	Allows cutter to slide over obstructions protecting gearbox output shaft & bottom seal.
10 Gauge smooth deck top	Reduces accumulation of debris and is easier and faster to clean.
3/16" Plate side skirt	Reduces debris piercing possibilities.
Wing skid shoes are flanged up along length of outside edge.	Allows operator to turn without leading edge of wing skid shoes digging into the ground.
Low hitch weight	Less drawbar wear. Less ballast required. Works well with lighter tractors.
Park Jack angle is adjustable	Help keep park jack vertical when in use.
Single remote hydraulics	Easy to operate. Fits most tractors, only one duplex outlet required.
Hinged wing sections 22° down & 45° up while cutting	Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches and hollows can cause uneven cutting.
7/8" Solid hinge rods	Gives great strength to the cutter from front to rear, and in the hinge area itself.
Wing transport locks	Holds transport wings in the folded-up position in case of hydraulic pressure loss.
Enclosed front to rear dual leveling rods	Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.
5-Bolt hubs	5-Bolt hubs makes the wheel assembly more durable and longer lasting.
Drain holes in wheel rims	Allows water to drain from wheels mounted on folded-up wings. Helps prevent paint deterioration and rusting to the wheel rims.
Spring-cushioned lift cylinder	Cushions loads on drawbar.
Replaceable wheel spindles	Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove one bolt to replace damaged spindle.
7/8" Leveling rods	Large diameter leveling rods provide superior supporting strength over rough terrain.
Airplane tires	Gives better cushion while transporting and provides flotation in soft ground.
LED Signal lights	LED lights are bright, long lasting and resistant to vibration, unlike the incandescent lights.
Optional Equipment
Swivel clevis hitch	Cutter can swivel clockwise and counterclockwise about tractor drawbar up to 12° in either direction. Pivoting up and down at the hitch is limited to the lower slot in the clevis and hole size in drawbar.
Land Pride Performance Hitch	Distributes cutter hitch weight between tractor and drawbar hitch hole. Clevis swivels two ways: Cutter can swivel clockwise and counterclockwise about tractor drawbar up to 12° in either direction. To reduce drawbar wear, clevis hitch pivots to keep clevis level with drawbar while going through ditches and over terraces.

Specifications

Model	RC2512
Tractor horsepower	40-100 hp (30 - 75 kw)
Gearbox horsepower Splitter Center & wings	160 hp (119 kW) 100 hp (75 kW)
Gearbox shafts Input shaft Output shaft	1 3/8" (3.5 cm) 6 Spline 1 1/2" (3.8 cm)
Gearbox capacity & lubrication Splitter Center & wings	4.5 pints of gear lube 80-90W EP 4 pints of gear lube 80-90W EP
Cutting capacity	1 1/2" (3.9 cm)
Hitch weight	793 lbs. (359.7 kg)
Machine weight	2,540 lbs. (1152.1 kg)
Blade tip speed At 540 rpm	Center Blades = 16,500 FPM (83.8 mps) Wing Blades = 16,000 FPM (81.3 mps)
Hitch types	LP Performance hitch and swivel hitch
Hitch jack	Standard 2,000 lbs. (907.2 kg)
Cutting width	12'-0"
Overall cutter width	12'-7"
Minimum transport width	7'-11" With front cutting blade 1 1/2" off the ground.
Overall length	13'-3"
Deck height	11"
Cutting height	1 1/2" to 12"
Lift hydraulics	2 1/2" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers
Wing folding hydraulics	2" x 8" hydraulic cylinders, hoses & fittings
Wing flex	Max. 20 degrees down, can float up as needed as long as the wheel(s) are still on the ground
Wing transport protection	Wing transport locks
Deck material	10 Gauge deck
Side skirt material	3/16" Plate
Skid shoes	Wing deck: 1 replaceable per wing; Center deck: 2 replaceable shoes
Blade rotation Left wing Center deck Right wing	Counterclockwise Counterclockwise Clockwise
Blades - 6 (2 per deck)	1/2" x 3" Heat treated free swinging alloy Steel with up lift
Blade overlap	6"
Blade bolt	Keyed with hardened flat washer & lock nut
Stump jumper / blade holder	10 Gauge round dish shaped pan, reinforced with 1" x 3 1/2" blade bar
Front & rear guards	Single chain
Input driveline	Category 4 with constant velocity u-joint
Intermediate & wing drivelines	Category 3 with slip-clutch
Wheels	20.5" x 6.75" x 10" used aircraft tires or 21" laminated wheels
Number of wheels	4 - Wheels: 2 on transport axle and one on each wing axle
Transport axle	Spring-cushioned lift cylinder
Signal lights	LED
7 Pin connector	SAE J560 pin configuration
Hubs	Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts.

Amount Financed ($)
Interest Rate (%)
Loan Term in Months
Monthly Payment	Calculated
Yearly Payment	Calculated

Submit your question below