Rusler Implement, Colorado Same Name. Same Family.
Since 1960.

Submit your question below

Fields with asterisks* are required.

Bush Hog DHP8

Rusler Implement, Colorado

Double tap to zoom

DHP Series Pull Disc Harrows

DHP8

Overview:

Bush Hog’s new Pull Disc Harrows, the DHP Series, are designed for pulverizing soil, seed bed preparation and general tillage. Solid built units available in widths of 8’, 10’ and 12’, the DHP line of disc harrows are ideally suited for use by small farmers, food plot managers, ranchers, construction crews and nursery operators. The DHP Series units share many features available on larger, more expensive models, including front-to-rear leveling, a depth control system, adjustable-gang angles, and streamlined tubular gang hangers. Multiple blade spacing options are available with your DHP Series Pull Disc harrows. Blade spacings of 7-1/2” allow for fine, finish discing needed for seedbed preparation or 9 inches for breaking up and fracturing “new ground” or a combination of the two. Six multiple blade spacing options for each model are available with your DHP Series Pull Disc Harrows; 20” or 22” notched discs at each of following spacing options: 7.5” front & rear, 9” front & rear, 9” front and 7.5”rear. High strength 1-1/8” square gang axles, combined with tough gang components, and triple lip sealed ball bearings, ensure the DHP models are ready for the toughest jobs. Put a Bush Hog DHP disc harrow to work for you today.

Get A Quote

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Loan Calculator

Use the Loan Calculator to help you determine the financing and payment options that are best for you.

Amount Financed ($)
Interest Rate (%)
Loan Term in Months
Monthly Payment Calculated
Yearly Payment Calculated

**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. This information is provided for illustrative purposes only and does not constitute an application.

Send To A Friend

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

Share This Product:


Features

Performance Features

  • Square and rectangle tube steel frames and gang tubes
  • Adjustable gang angles, front and rear
  • Variable Blade Spacings Available: 9” front and rear gangs for tough-to-cut “New Ground” • 7 1/2” front and rear gangs for finer soil finishing • 9” front gangs/7 1/2” rear gangs–the best of both worlds
  • 1 1/8” square, high carbon steel gang axles
  • Available in tractor colors
  • Optional disc scrapers, Center Sweep Kit, Dual Wheel Transport Kit

 

Product Features

  • Bearing hangers reinforces with gussets
  • Notched discs for maximum cutting action

Specifications

Model Number DHP8
Drawbar horsepower requirement 40-65 hp
Hitch type Pull-type w/clevis & hole for 1 1/4” pin
Approximate transport width 8’-10”
Max. cultivation width 8’-6”
Mainframe width 60”
Approx weight load on each blade (lbs.) 95-114
Disc blade sizes and types 20” or 22” Notched
Disc blade spacing 7.5” or 9” or a combination of both
Disc bearing type Triple lip sealed ball bearings
Number of bearings 8
Forward gang angle adjustment 15, 16.5, 18, 19.5, 21 Degrees
Rear gang angle adjustment 12, 13.5, 15, 16.5, 18 Degrees
Hitch frame construction 4” x 4” x 1/4” tubing
Side mainframe construction 4” x 3” x 1/4” tubing
Mainframe Width 60"
Mainframe middle tube construction 4” x 3” x 1/4” tubing
Gang arm construction 4” x 3” x 1/4” tubing
Gang axle 1 1/8” Square, High Carbon Steel
Front to rear leveling system Manual crank adjustment
Depth control Cylinder stroke control spacers
Hydraulic cylinder 3- 1/2” x 8” ASAE hydraulic cylinder
Transport tires and wheels Two 9.5L x 15 tires on 15” x 6” - 5 bolt wheels
Parking jack Standard
AVAILBLE OPTIONS  
Disc Scrapers, Center Sweep Kit, Dual Wheel Transport Kit