Search Inventory
Search Products & Site
Land Pride RC3620
Features
| Features | Benefits |
| Surpassed rugged industry standards |
All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures. |
| Factory assembled | Saves customer set-up time and money. Adjustments should always be made by dealer. |
| 7 Year gearbox warranty* | Shows confidence in gearbox integrity. |
| 250 HP divider gearbox 130 HP center & wing gearboxes |
A rugged heavy-built gearboxes capable of handling heavy-cutting applications. |
| Gearbox Seal Protection | Gearbox bottom seal protection for longer bearing life. |
| 2" Output gearbox shaft | Large output shaft handles shock loads better. |
| Input driveline: Cat. 6 CV or Cat. 5 Conventional |
Holds up to shock loads and harsh mowing conditions. |
| Easy Greasable drivelines | Drivelines have access holes for greasing the U-joints and to grease the inner profiles. |
| 2 or 4 Plate slip-clutch | Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline when impacts are encountered. |
| High blade tip speed | Allows clean cutting of material & even distribution. See Specifications for actual FPM. |
| 6" Blade overlap | Eliminates skipping during turns. |
| Good cutting capacity | Can cut brushy areas with saplings up to 2". |
| 13" Deck height | Handles heavy cutting, which reduces balling-up of cut material under the deck. |
| 10 Ga. stump jumper backed with a 1" x 4 1/2" thick blade mounting bar |
Heavy round stump jumper for protecting the gearbox seal and gearbox output shaft. Can hold up to tough conditions. |
| Spindle Nut Protected | Spindle nut and threads extending beyond the nut are guarded to protect against damage from hitting solid objects. |
| 10 gauge smooth deck top | Reduces accumulation of debris and is easier and faster to clean. |
| 1/4" side skirt | Reduces debris piercing possibilities. |
| Self-leveling hitch | Reduces drawbar wear by keeping hitch level while going through ditches. |
| Hinged wing sections | Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting. |
| 1" Solid hinge rods | Larger diameter hinge gives greater strength to cutter and hinge area. |
| Wing transport locks | Holds transport wings in the folded-up position in case of hydraulic pressure loss. |
| Enclosed front to rear dual leveling rods |
Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod. |
| 5-Bolt hubs | 5-Bolt hubs makes the wheel assembly more durable and longer lasting. |
| Drain holes in wheel rims | Allows water to drain from wheels mounted on folded-up wings. Helps prevent paint deterioration and rusting to the wheel rims. |
| Spring-cushioned center axle | Protects unit from bumps and ground shock, cushions loads on drawbar. |
| Replaceable wheel spindles | Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove one bolt to replace damaged spindle. |
| Rephasing lift cylinders | Allows cutter to be leveled using hydraulic cylinders verse mechanical turnbuckles. |
| 7/8" Leveling rods | Large diameter leveling rods provide superior supporting strength over rough terrain. |
| Double swivel hitch option | Great for uneven terrain, reduces drawbar wear. Must use spacer washers on drawbar. |
| LP Performance Hitch option | Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar. |
| Bar-tite hitch option | Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear. |
| LED Signal lights | LED lights are bright, long lasting, and resistant to vibration, unlike incandescent counterparts. |
| Wheel options | Laminated tires: Eliminates flats. Airplane tires without foam filling: Give better cushion while transporting. Airplane tires with foam filling: Give better cushion while transporting & can’t go flat. |
| Deck rings (optional) | Keeps blades from damaging the deck. |
Specifications
| Specifications & Capacities | RC3620 & RCM3620 |
| Tractor horsepower | 70 hp (52.2 kw) to 160 hp (119.3 kw) |
| Gearbox Horsepower | 250 hp (186.4 kw) Splitter 130 hp (96.9 kw) Center & Wing |
| Gearbox Oil Capacity | 5.18 Pints (: Divider Gearbox 6.76 Pints: Center deck, LH deck & RH deck spindle gearboxes |
| Gearbox Lubrication | Gear Lube 80-90W EP |
| Cutting Capacity | 2" (5.1 cm) |
| Weights Total Machine Tongue Weight |
6,680 lbs. (3030 kg) (Front & Rear Single Chain guards, 6 AC tires, CV Driveline, & standard clevis.) 1,750 lbs |
| Blade Tip Speed RC3620 RCM3620 |
16,000 FPM (81.3 mps) 16,500 FPM (83.8 mps) |
| Hitch Types | Optional Self-Leveling Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Pintle Hitch, or Ball Hitch |
| Hitch Jack | Standard 7,000 lbs. (3,175 kg) |
| Signal Lights 7 Pin connector | LED SAE J5560 pin configuration |
| Cutting Width Overall Width Minimum Transport Width |
20' - 0" (6.10 m) 20' - 10" (6.35 m) 9' - 11" (3.02 m) (With cutting height at 2") |
| Overall Length | 17' - 6" (5.33 m) (With cutting height at 2") |
| Deck Height | 13" (33 cm) |
| Cutting Height* | 2" to 12" (5.1 cm to 30.5 cm) |
| Lift Hydraulics Center Deck Right Wing Left Wing |
3 1/4" x 8" Rephasing hydraulic cylinder with hoses, fittings & stroke control spacers. 3" x 8" Rephasing hydraulic cylinder with hoses & fittings. 2 3/4" x 8" Rephasing hydraulic cylinder with hoses & fittings. |
| Wing Folding Hydraulics | Two 3" x 12" single-acting hydraulic cylinders complete with hoses & fittings. |
| Wing Flex | 45° up, 20° Down while cutting. |
| Deck Material | 1 - Piece, 10 gauge. (3.4 mm) |
| Side Skirt Material | 1/4" plate (6 mm) |
| Skid Shoes Wing Deck Center Deck |
Reversible & Replaceable: 2 straight skid shoes and 2 AR400 leading skid shoes. Replaceable: 2 skid shoes |
| Six Blades (2 per Carrier) | 1/2" x 4" Heat Treated Free Swinging Alloy Steel with up lift. |
| Blade Overlap | 6" |
| Blade Bolt | Keyed with hardened flat washer & locknut. |
| Stump Jumper / Blade Holder | 10 Gauge round dish shaped pan, reinforced with 1" x 4 1/2" blade mounting bar. |
| Deck Ring | Optional 3/8" formed and welded. |
| Front & Rear Guards | Optional single chain or double chain. |
| Input Driveline | ASAE Cat. 6 with constant velocity u-joint or Cat. 5 with conventional (non-cv) u-joint |
| Intermediate & Wing Drivelines | Cat. 4 with slip-clutch or optional Cat. 5 with slip-clutch |
| Tire Options | 6" x 9 x 21" Laminated tires 29" x 9" Used aircraft tires without foam filling 27" x 7.75" Used aircraft tires with foam filling |
| Number of Wheels | 6 - Wheel option: 4 on transport axle and one on each wing axle. 8 - Wheel option: 4 on transport axle and two on each wing axle. |
| Standard Transport Axle | Spring-cushioned on center transport axle. |
| Axle Fasteners | 1 1/4" Greasable pins |
| Hubs | Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts. |
Featured New Products
