HayBuster 2655 Balebuster - old / NOT AVAILABLE
Double tap to zoom
Bale Processors 2655 Balebuster - old
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Share This Product:
Features
TWO STAGE BALE LOADER
The 2655 speeds up the loading process by allowing each bale to be lifted separately without disturbing the other bales. The bale loader also carries a second bale, to increase productivity.
Specifications
| WEIGHT | |
| Total | 4700 lbs. (2132 kg) |
| Tongue (Bale loader fully raised) | 1300 lbs. (589.7 kg) |
| TRANSPORT DIMENSIONS (Bale loader fully raised, deflector folded) | |
| Width | 8 ft 4 in (2.52 m) |
| Length | 14 ft 11 in (4.55 m) |
| Height | 11 ft (3.35 m) |
| WORKING DIMENSIONS (With 1 bale, deflector in spread position) | |
| Width | 10 ft 10 in (3.31 m) |
| Length | 14 ft 11 in (4.55 m) |
| Height | 11 ft (3.35 m) |
| WORKING DIMENSIONS (With 2 bales, deflector in spread position) | |
| Width | 10 ft 10 in (3.31 m) |
| Length | 19 ft 7 in (5.95 m) |
| Height | 11 ft (3.35 m) |
| CHASSIS FEATURES | |
| Towing Arrangement | Clevis type hitch. |
| Jack Capacity | 5000 lbs. (2273 kg) |
| Jack Travel | 10 in (25.4 cm) |
| Tires | 2) 12.5L x 15 - 8 Ply |
| Wheels | 2) 10 x 15 - 6 Bolt, Drop Center |
| Bearing Type | Tapered Roller |
| BALE LOADER | |
| Type | Integral 2 Stage, Twin Boom Arms |
| Bale Tines | Tubular Steel, 10° Float, 4 Position Width |
| Adjustable Hydraulic Cylinder | 4-1/2 in x 24 in (11.43 cm x 60.96 cm ), Double-Acting |
| BALE CONVEYOR | |
| Type | 3 Roller Chains with Bolt-On Cross Slat |
| Drive | Hydraulic Orbital Motor with Adjustable Flow Control |
| BALE SHREDDER CHAMBER | |
| Max. Bale Size | 6 ft. long x 6-½ ft. dia. (1.83 m x 1.98 m) |
| Max. Bale Weight each | 2200 lbs. (1000 kg) |
| Rotor Length | 78 in. (1.98 m) |
| Rotor Diameter (Flails extended) | 25 in. (63.5 cm) |
| Rotor Bearing | Ball, 1-3/4 in. (4.44 cm) |
| Number of Flails | 40 |
| Rotor Speed | 1300 RPM |
| Flail type | Heavy Duty, 7/16 in. (11.11 mm) thick, 3 lbs. (1.36 kg), Heat Treated Spring Steel, Swinging |
| Number of Stripper Channels | 3 |
| Number of Slug Bars | 9 |
| Slug Bar | Single point, 5 Adjustment Settings through a 180 Degree Range (optional hydraulic adjustment) |
| Delivery | Right Hand Discharge |
| Deflector | 6 Adjustment Settings through a 120 Degree Range |
| Max. Horizontal Spread | Straw, up to 50 ft. (15.24 m) |
| OPERATOR CONTROLS | |
| Loader | 1 Tractor Double-Acting Hydraulic Valve |
| Bale Conveyor | 1 Tractor Double-Acting Hydraulic Valve |
| Bale Conveyor Speed | Conveyor Speed Control Valve |
| Slug Bar | Hand Lever with 5 Settings (optional hydraulic adjustment) |
| Deflector | Hand Lever with 6 Settings (optional hydraulic adjustment) |
| REQUIREMENTS FOR OPERATION | |
| PTO Horsepower Required | 65hp (48.5kw) to 155hp (115.6kw) |
| PTO Type | 1000 RPM, 1-3/8 in. dia. PTO Shaft with 21 Splines choice of Constant Velocity or Standard PTO |
| Min. Tractor Hydraulic Output | 8 gpm at 1500 psi (46 lpm x 10,345 kPa) |
| Tractor Hydraulic Controls | 2 Double-Acting Control Valves with Quick Coupler Outlets |
| Tractor Weight | Must be of equal or greater weight than that of a 2655 with 2 bales |
